OTHER TYPES

PRODUCTS | OTHER TYPES

OTHER TYPES OF SOLENOIDS

Solenoid for extreme underwater service - type TM35kHP

• Designed to withstand long-term hydrostatic pressure up to 50 bar (500 m depth)
• IP rating: IP68
• Sea water resistant
• Voltages: 12 or 24 V DC (other voltages available on demand)
• Power: 80 W pull / 3-4 W hold
• Cable: PVC 3 x 0.75 mm2 x 3 m length (other lengths available on demand)

Solenoids for extremely humid ambients - rating IP67

Voltage	Order code	Power
	TM30k
	Standard power
230 V AC	295831	7 W
24 V AC	295833	7 W
24 V DC	295836	6 W
12 V DC	295838	10 W
6 V DC	295840	7 W

Voltage	Order code	Power
	TM35k
	Low power - low heating
24 V DC	297870	4.5 W
115 V DC	297872	4.5 W

Cable: PVC 3 x 0.75 mm2 x 3 m length (Other lengths available on request)

Solenoids with DIN 72585-A1-2.1 connector

Voltage	Order code	Power	Order code	Power
	TM25b		TM30b
24 V DC	296860	6 W	295860	10 W
12 V DC	296862	6 W	295870	10 W

Dimensions (mm):

Type	A	B	C	D	E
TM25b	33.6	24	41	10	15
TM30b	40	30	44	14.5	19

Connector: DIN 72585-A1-2.1 (Other 2-pole variants possible on request)

Solenoid with moulded-in cable, rating IP65

Voltage	Order code	Power
	TM25k
230 V AC	296191	4 W

Sealing sets for humid ambients

Solenoid	Set order code
TM30, TM35, TMEx35	298237 for 2/2 valves 298239 for 3/2 valves
TM40, TMEx40	298227

Set consists of O-rings or profiled seals and brass nut.
Seals are placed onto solenoid base, under and above solenoid and fixed with brass nut.
Properly fitted sealing set prevents damp intrusion into solenoid.