500 bar all-round use solenoid valves

500 BAR ALL-ROUND USE SOLENOID VALVES

Closed when de-energised (NC)

Ports Orifice
size
[mm]		 Kv [l/min] Differential pressure
[bar]		 Material Mass
[kg]		 Coil type Model Voltage Power
[W]		 Order code
(water at 1 bar) min max body seal
G1/4 0.9 0.3 0 400 INOX PEEK 0.52 TM35 XD2N 230 V AC 8 320874
24 V DC 18 320875
PU 0.52 TM35 XD2N 230 V AC 8 320852
1 0.3 0 500 INOX PEEK 0.52 TM35 XD2N 230 V AC 8 320870
350 INOX PEEK 0.52 TM35 D22N 24 V AC 16 320837
24 V DC 12 320827
PU 0.52 TM35 D22N 230 V AC 16 320841
250 INOX PTFE 0.52 TM35 D22N 230 V AC 16 320765
Brass PTFE 0.52 TM35 D220 12 V DC 9 320783
1.2 0.65 0 250 INOX PU 0.52 TM35 D22N 230 V AC 8 320756
200 INOX PTFE 0.52 TM35 D22N 230 V AC 8 324803
Brass PTFE 0.52 TM35 D22 24 V DC 12 324804
D220 12 V DC 18 324778
150 INOX PTFE 0.52 TM35 D221N 230 V AC 8 320709
D221N 24 V AC 8 320727
D220N 24 V DC 12 324721
Brass PTFE 0.52 TM35 D220 24 V AC 8 320702
FPM 0.52 TM35 D220 230 V AC 8 320701
1.4 0.7 0 200 Brass PTFE 0.52 TM35 D221 230 V AC 16 324735
150 Brass PTFE 0.52 TM35 D220 24 V DC 18 320759
2 1.5 0 150 INOX PU 0.52 TM35 D22N 230 V AC 16 320816
2.3 1.9 0 100 Brass PU 0.52 TM35 D22 230 V AC 16 320886
NPT 1/4 0.9 0.3 0 400 INOX PEEK 0.52 TM35 XD2N 115 V AC 16 320835
1 0.3 0 250 INOX PTFE 0.52 TM35 D22N 115 V AC 8 324808
1.2 0.46 0 250 INOX PTFE 0.52 TM35 D22N 24 V DC 18 324734

Open when de-energised (NO)

Ports Orifice
size
[mm]		 Flow coeficient
Kv [l/min]		 Differential pressure
[bar]		 Material Mass
[kg]		 Coil type Model Voltage Power
[W]		 Order code
(water at 1 bar) min max body seal
G1/4 0.5 0.15 0 350 INOX PEEK 0.52 TM35 D22NNO 230 V AC 8 329717
24 V AC 8 329778
PU 0.52 TM35 D22NNO 230 V AC 8 329469
0.9 0.3 0 250 INOX PEEK 0.52 TM35 D22NNO 230 V AC 16 329716
24 V AC 16 329757
24 V DC 18 329730
G1/4 1 0.3 0 120 Brass FPM 0.52 TM35 D22NO 230 V AC 8 329781
115 V AC 8 329471
24 V AC 8 329756
24 V DC 12 329739
150 Brass FPM 0.52 TM35 D22NO 12 V DC 18 329816

CHARACTERISTICS OF SEALING MATERIALS:

  • PEEK - excellent hardness and wear resistance, large number of cyles, imperfect sealing at lower pressure is possible
  • PTFE - very good hardness and wear resistance, good sealing properties, good price/performance ratio
  • PU - excellent sealing properties, not suitable for high cycling rate, not suitable for liquids
  • FPM - elastomer for use at medium pressure when perfect sealing is required

More information on sealing materials.

NOTE: Order code 320870 has port depth 13 mm and total length 52 mm.

NC function

NO function